物性信息：
| 比重 | 2.10 - 2.12 g/cc | 2.10 - 2.12 g/cc | ASTM D792 |
| 吸水率 | <= 0.030 % | <= 0.030 % | ASTM D570 |
| 熔体流动速率 | 7.0 - 18 g/10 min | 7.0 - 18 g/10 min |
| 肖氏硬度 (邵氏 D) | 60 | 60 | ASTM D1706 |
| 抗张强度(断裂) | 32.0 MPa | 4640 psi | ASTM D638 |
| 极限抗拉强度 | 8.00 MPa @Temperature 250 °C | 1160 psi @Temperature 482 °F | ASTM D638 |
| 伸长率 (断裂) | 410 % | 410 % | ASTM D638 |
| 600 % @Temperature 250 °C | 600 % @Temperature 482 °F | ASTM D638 | |
| 弯曲模量 | 0.630 GPa | 91.4 ksi | ASTM D790 |
| 悬壁梁缺口冲击强度 | NB | NB | ASTM D256A |
| 动态摩擦系数 | 0.20 | 0.20 |
| 体积电阻率 | >= 1.00e+18 ohm-cm | >= 1.00e+18 ohm-cm | ASTM D257 |
| 表面电阻 | >= 1.00e+17 ohm | >= 1.00e+17 ohm | ASTM D257 |
| 介电常数 | <= 2.1 @Frequency 60 Hz | <= 2.1 @Frequency 60 Hz | ASTM D150 |
| <= 2.1 @Frequency 1000 Hz | <= 2.1 @Frequency 1000 Hz | ASTM D150 | |
| <= 2.1 @Frequency 1e+6 Hz | <= 2.1 @Frequency 1e+6 Hz | ASTM D150 | |
| 耗散因数 | <= 0.00020 @Frequency 60 Hz | <= 0.00020 @Frequency 60 Hz | ASTM D150 |
| <= 0.00020 @Frequency 1000 Hz | <= 0.00020 @Frequency 1000 Hz | ASTM D150 | |
| <= 0.00020 @Frequency 1e+6 Hz | <= 0.00020 @Frequency 1e+6 Hz | ASTM D150 | |
| 耐电弧性 | >= 300 sec | >= 300 sec | ASTM D495 |
| 线性热膨胀系数 | 130 µm/m-°C @Temperature 20.0 °C | 72.2 µin/in-°F @Temperature 68.0 °F | ASTM D696 |
| 比热容 | 1.046 J/g-°C | 0.2500 BTU/lb-°F | |
| 导热系数 | 0.251 W/m-K | 1.74 BTU-in/hr-ft²-°F | ASTM C177 |
| 熔融温度 | °C | °F | |
| 最高工作温度, Air | 260 °C | 500 °F | Continuous |
| 可燃性(UL94) | V-0 | V-0 | |
| 极限氧指数 | >= 95 % | >= 95 % | ASTM D2863 |
| Ball Pressure Temperature, °C | 230 | |
| Flex Life, Cycles | 25000 |
