Chemical abbreviation according to ISO 1043-1: POM
Molding compound ISO 9988- POM-K, M-GNS, 02-002, K10
POM copolymer
Injection molding type, special modified with anti-friction
additives for prevention of squeaking noise; good chemical
resistance to solvents, fuel and strong alkalis as well as good
hydrolysis resistance; high resistance to thermal and oxidative
degradation.
UL-registration in natural and black and a thickness more than
1.5 mm as UL 94 HB.
Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness
more than 1,5 mm.
Ranges of applications: For sliding combinations with low wear and
low coefficient of friction, prevents squeaking noise.
UL = Underwriters Laboratories (USA)
FMVSS = Federal Motor Vehicle Safety Standard (USA)
Hostaform® C 9021 SW 物性表
| 黄卡编号 | E42337-234621 |
| 添加剂 | 减声器 |
| 特性 | 低摩擦系数 抗溶剂性 耐化学性良好 耐碱 耐磨损性良好 耐燃油性 耐水解性 |
| RoHS 合规性 | 联系制造商 |
| 加工方法 | 注射成型 |
| 多点数据 | Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) |
| 树脂ID (ISO 1043) | POM |
| 密度 | 1.42 | g/cm3 | ISO 1183 |
| 溶化体积流率（MVR） (190°C/2.16 kg) | 6.50 | cm3/10min | ISO 1133 |
| 收缩率 | ISO 294-4 | ||
| 垂直流动方向 | 1.8 | % | ISO 294-4 |
| 流动方向 | 2.0 | % | ISO 294-4 |
| 吸水率 (饱和, 23°C) | 1.2 | % |