环氧乙烷消毒R-5100 PPSU美国苏威

环氧乙烷消毒R-5100 PPSU美国苏威---RADEL ®  PPSU R-5100 NT-15 >PPSU-FR< Flame retardant grade: V-0 • 5VA

Notch impact: 70.40 kj/m ²

Thermal deformation temperature: 214 ° C

Processing method: Injection molding • extrusion molding • blow molding • thermoforming • numerical control

Material properties: Flame retardant, high heat resistance grade, hydrolytic resistance grade, drinking water contact grade, medical grade

Compliance: ISO 10993 • NSF/ANSI 51 • NSF/ANSI/CAN 61 • UL

Material properties: Acid resistance • high pressure sterilization • alkali resistance • biocompatibility • chemical resistance • electron beam sterilization • ethylene oxide sterilization • general grade • thermal sterilization • stress cracking resistance • high temperature resistance • gamma ray resistance • radiation sterilization • translucent wireless communication • steam resistance • steam sterilization • high toughness • good disinfection

R-5100 PPSU可燃性额定值单位制测试方法

UL 阻燃等级 1(0.750 mm, 所有颜色, UL 文档 E36098)	V-0		UL 94
极限氧指数	38	%	ASTM D2863

R-5100 PPSU光学性能额定值
测试方法

折射率	1.672		ASTM D542

R-5100 PPSU注射额定值单位制

干燥温度	149	°C
干燥时间	2.5	hr
建议的 大水分含量	0.050	%
料筒后部温度	321	°C
料筒中部温度	349	°C
料筒前部温度	349	°C
加工（熔体）温度	343 到 388	°C
模具温度	138 到 163	°C
背压	0.345 到 0.689	MPa
螺杆压缩比	2.2:1.0