高刚性PBT德国巴斯夫B4300G3特性：玻璃纤维增强材料, 15%，中等硬度，用途：把手，外壳，旋钮
德国巴斯夫B 4300 G3 PBT 物性表
| 密度 | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
| 吸水率 | 0.40 % | 0.40 % | ISO 62 |
| 平衡吸湿 | 0.20 % | 0.20 % | 23°C/50% R.H.; ISO 62 |
| 粘度测试 | 111 cm³/g | 111 cm³/g | Viscosity number |
| 线性成型收缩率 | 0.0050 cm/cm | 0.0050 in/in | ASTM Data; MD |
| 熔体流动速率 | 22 g/10 min @Load 2.16 kg, Temperature 250 °C | 22 g/10 min @Load 4.76 lb, Temperature 482 °F | ISO 1133 |
| 抗张强度(断裂) | 93.0 MPa | 13500 psi | 0.2 in/min; ASTM Test |
| 极限抗拉强度 | 93.0 MPa | 13500 psi | 5mm/min; ISO 527 |
| 伸长率 (断裂) | 4.0 % | 4.0 % | 5mm/min; ISO 527 |
| 4.0 % | 4.0 % | 0.2 in/min; ASTM Test | |
| 拉伸模量 | 5.52 GPa | 801 ksi | ASTM Test |
| 6.00 GPa | 870 ksi | 1mm/min; ISO 527 | |
| 弯曲模量 | 4.80 GPa | 696 ksi | ISO Data |
| 4.83 GPa | 701 ksi | ASTM Test | |
| 悬壁梁缺口冲击强度 | 0.430 J/cm @Temperature -40.0 °C | 0.806 ft-lb/in @Temperature -40.0 °F | ASTM Test |
| 0.530 J/cm @Thickness 3.17 mm | 0.993 ft-lb/in @Thickness 0.125 in | ASTM Test | |
| 8.50 kJ/m² | 4.04 ft-lb/in² | ISO Test |
| 体积电阻率 | >= 1.00e+13 ohm-cm | >= 1.00e+13 ohm-cm | IEC 60093 |
| 表面电阻 | 1.00e+13 ohm | 1.00e+13 ohm | IEC 60093 |
| 介电常数 | 3.7 @Frequency 100 Hz | 3.7 @Frequency 100 Hz | IEC 60250 |
| 3.7 @Frequency 1.00e+6 Hz | 3.7 @Frequency 1.00e+6 Hz | IEC 60250 | |
| 耗散因数 | 0.0012 @Frequency 100 Hz | 0.0012 @Frequency 100 Hz | IEC 60250 |
| 0.015 @Frequency 1.00e+6 Hz | 0.015 @Frequency 1.00e+6 Hz | IEC 60250 |
| 线形热膨胀系数 - 流动 | 40.0 µm/m-°C | 22.2 µin/in-°F | ISO 11359 |
| 熔融温度 | 223 °C | 433 °F | 10 K/min |
| 223 °C | 433 °F | ASTM Test | |
| 载荷下热变形温度(0.46 MPa) | 220 °C | 428 °F | ASTM Test |
| 220 °C | 428 °F | ISO 75 | |
| 载荷下热变形温度(1.8 MPa) | 183 °C | 361 °F | ISO 75 |
| 203 °C | 397 °F | ASTM Test | |
| 可燃性(UL94) | HB @Thickness 1.60 mm | HB @Thickness 0.0630 in | |
| HB @Thickness 0.800 mm | HB @Thickness 0.0315 in |
| 加工（熔体）温度 | 265 °C | 509 °F | Injection molding |
| 射速 | 70.0 mm/sec | 2.76 in/sec | Injection molding |