Polyamide 6
KPOL Chem Co.
产品说明：
Standard Polyamide 6
Applications
General purpose, Injection Molding and Extrusion/Molding applications.
Characteristics
Exhibit excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good set of mechanical properties, strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.
物性信息：
| 特性 | 刚性，良好 良好的强度 良好耐磨损性 流动性高 耐化学性良好 耐热性，高 韧性良好 |
| 用途 | 通用 |
| 形式 | 粒子 |
| 加工方法 | 挤出 注射成型 |
| 比重 | 1.14 | g/cm³ | ASTM D792 |
| 吸水率 (平衡) | 1.2 | % | ASTM D570 |
| Relative Viscosity 1 | 2.8 | ASTM D789 |
| 抗张强度 (屈服, 23°C) | 78.0 | MPa | ASTM D638 |
| 悬壁梁缺口冲击强度 (23°C) | 56 | J/m | ASTM D256 |
| 熔融峰值温度 | 222 | °C | ASTM D2117 |
